ONeill | Zeolite Womens Jacket | 2021 | Scale
The O'Neill Zeolite Jacket is all fashion and all function too. With a removable faux fur hood trim and a drop tail hem, it's easy to dial in for the conditions. And thanks to a tough waterproof membrane and 100g of low-bulk Thinsulate insulation, it'll keep you warm and dry through storms.
100% Polyester Dobby
O’Neill Hyperdry Treatment – O’Neill Hyperdry is a hydrophobic nano-technology durable water repellency treatment that allows fabric to dry ultra-fast and repel water while maintaining breathability and natural softness.
10K Waterproofing / 10K Breathability
100g / 80g 3M Thinsulate™ Insulation – Thinsulate™ has a dense structure of very thin (~ 15 micrometers) fibers that provides warmth without thickness.
Center Back Length – 31.5" (M)
Waist Adjustment – Adjustable velcro straps on the waistband to adjust the fit and width of the waistband.
Ergonomic Shaped Pattern – Ergonomically curved seams for maximum freedom of movement.
Lift Pass Pocket
Critically Taped Seams – In order to make an outerwear garment waterproof, you need more than waterproof fabrics - you also need taped seams. A simple seam becomes a taped seam once waterproof taping has been carefully and firmly placed over a stitched seam. Critically taped seams means that only the seams in critical, exposed areas are taped.
Detachable Snow Gaiter – The barrier between the snow and your body when you take a tumble. This piece of fabric is found at the bottom hem inside the jacket with press buttons to seal it and stop snow getting in.
Wrist Gaiters – A stretchy piece of fabric at the end of the arm cuff which you can put your hands in to stop snow going down your sleeve.
Belt Connector Jacket-to-Pant Interface – The connector lets you connect the pants snow gaiter to the jacket at the front as well as the rear and the sides. Just loop your belt through and away you go.
Storm Placket – Covers the zipper to keep moisture and the cold air out. A protective flap of fabric which sits in front of the jacket over the zip to stop cold winds getting into your jacket.
Chinguard Protector – A protective piece of comfortable fabric to keep the zip soft and cozy against your chin and avoid rash.
Fixed Hood with Inner Collar – Keep the heat in and the snow out with the fixed hood. Ergonomically shaped hood with built-in visor provides storm coverage.
Detachable Faux Fur Hood
- Fit: Regular
- Length: Hip-length
- Material: Polyester
- Construction Type: 2 Layer
- Breathability (g): 10000
- Insulation: Thinsulate™
- Fill Weight (g): 100
- Seam Sealing: Critically Taped
- Powder Skirt: Yes
- Hood Type: Fixed Hood
- Petite Jacket: No
- Extendable Kids' Outerwear: No